![pageSearch](/themes/hestia/images/page-search.webp)
Snap Action Thermostat Market Extensive Global Trade Data
Aug 27, 2023What type of weather thermometer is the most accurate?
Aug 13, 2023Why homes often feel warmer than the thermostat suggests
Aug 30, 2023Yummly's elegant magnetic smart meat thermometer now down at $66 (2023 low)
Aug 14, 2023Analysis: Why your home might feel hotter than the thermostat says, and tips for cooling it down
Aug 20, 2023INKBIRD IBT
![Aug 01, 2023](/themes/hestia/images/news-details-icon1.webp)
By: Author James Smythe
Posted on 23rd August 2023
You are here: Reviews
A couple of years ago, I reviewed the Weber Connect Smart Grilling Hub. At the time, it was one of the only WiFi-equipped BBQ thermometers on the market. Unfortunately, it wasn’t very good at launch as it had a significant amount of teething problems, specifically with WiFi connectivity and the app crashing. To make matters worse, it launched for £150, and they still sell it for £125.
To be fair, it has improved a lot over time, but during this time, plenty of new WiFi-equipped models have launched and for considerably less than £125.
One model is the Inkbird IBT-26S which has two models, one with 2.4GHz and the other with both 2.4GHz and 5GHz. The model I was sent to review is the 2.4GHz model, and this is listed on Amazon for £80 but with a 40% off voucher, taking it down to £48. Looking at Keepa, £48 appears to be the normal reduced price. That’s over 60% cheaper than the Weber Connect Smart Grilling Hub.
While the Weber Connect Smart Grilling Hub does have some features that are better than the Inkbird, I have found the Inkbird to be the superior WiFi BBQ thermometer.
The Inkbird IBT-26S has a plastic body, so you will probably want to be careful where you place this near your BBQ. The included probes have long cables, so I ended up placing it on the floor when I used it.
The back is magnetic, which is useful if you have something like metal doors on your BBQ, or alternatively, it attached nicely to my oven.
There are six ports for the probes, with one being designed for the over, and you get four probes included. This is significantly better than the Weber I previously used.
For charging, this uses USB-C, which is convenient, and they claim the battery will last 32 hours.
The display is large, with a good amount of information displayed. One issue with the display was that I found it difficult to read outdoors on a sunny day, which is not ideal for a BBQ thermometer. You can change the display brightness within the app, and of course, the app shows you all the information, so it is not the end of the world.
The app required me to sign in with an account, which I find unnecessary for most IoT devices.
You then need to power on the Inkbird by holding down the power button for a few seconds. Then if you tap the power button three times, this puts it into pairing mode.
I had issues getting it to work with WiFi. It found the Inkbird quickly with Bluetooth, but when I provided the WiFi credentials, it wouldn’t connect. If I went back a step, the app wouldn’t be able to see the Inkbird, and I’d have to close the app and then reboot the Inkbird.
I tried connecting to a dedicated 2.4GHz network with my EnGenius access point and the Google Nest WiFi Pro, which combines the bands into one.
Eventually, I managed to get it to work. I’d connect it to Bluetooth, then back out of the set-up process and go into the settings of the device while connected using Bluetooth, and then connect to WiFi from there.
I have only reviewed two multi-probe WiFi BBQ thermometers, there may be better comparisons to be made, but this is the best I can do with products I have hand on experience with.
Both devices are far from perfect:
The main advantage this has is that it comes with four probes as standard. This allows you to monitor the temperature of the BBQ itself and then three separate pieces of meat. Or in my case, I used three probes on one large chicken.
With large cuts of meat, or a big chicken, using multiple probes is very handy. I found that it was easy to not place the probe into quite the right place with the Weber and end up with incorrect readings. So, with my large chicken, I had three data points to be sure.
Furthermore, Weber wants over £20 per probe if you want additional probes. That’s ridiculous. Inkbird sells a four-pack kit for £30 or a single probe for £15, but you can pick them up on eBay for cheaper. A single probe is about £12. Some of the older models have probes as cheap as £8, and I’d imagine the IBT-26S probe price will also decrease.
The Inkbird app isn’t as attractive as the Weber app, and it doesn’t have the cooking guides, but it does have a handy graph showing you how quickly the food temperature is rising and the highest/lowest temperature. Which I expect would be useful over long cooks or to monitor the ambient BBQ temperature.
The main advantage I found with the Weber was that it has comprehensive guides for various meals, including pulled pork, beef brisket, rib of beef, steak, whole chicken, lamb and fish.
The app will also provide additional assistance, such as notifying you when the food is ready to flip.
The weather has been inclement recently, but I managed to use this a couple of times. I haven’t had the opportunity to do a long and slow cook yet, but I expect the performance will be the same.
With a large chicken, I used three probes in the meat, then the fourth to monitor the ambient temperature of the BBQ. This reassured me that the meat was cooked properly.
When starting the cook, you can select high and low temperatures. There are four presets, and I used the chicken preset, this is obviously not as good as the guides the Weber app has, but it is not hard to Google cook times and temperatures then manually set them.
I did have a few connectivity issues. When nearby, it seems to use Bluetooth, then it will lose connection when I move away. But it is sometimes slow to connect to the WiFI, I would have to go back into the home screen then back into the device.
The notifications seemed to come through reliably, even with the occasional connectivity issues.
When it hit the temperature, I was notified via the app, and the thermometer started to bleep. You can clear the notification in the app, but the thermometer continued to make a loud bleep, which was a bit annoying for my neighbours. Obviously, I should have taken the meat off at this time, but I was waiting for other things to cook, so I had to clear the temperature settings to stop the bleeping.
The Inkbird IBT-26S is listed on Amazon for £80, and at the time of writing, there was a 40% off voucher available.
The 5Ghz (IBT-26S-5G) model is available for £10 more, also with 40% off.
Inkbird then has the IBT-4XC at £65 with 20% off, this is more basic, but it is IPX5 rated, which can be useful if you are trying to do a slow cook with inclement weather.
The Weber Connect Smart Grilling Hub is still sold for £125, making it hard to recommend over the Inkbird. The older, better-reviewed Weber iGrill thermometers, which are Bluetooth only, range in price from £54 to £102.
The four-probe Meater Block or single-probe Meater Plus are arguably the best options on the market, being wireless probes that connect via WiFi. They are priced accordingly, at £240 for the Block and £95 for the Plus. There are some cheaper alternative brands that replicate this design but they are generally Bluetooth, such as the ThermoPro TempSpike for £62.
The Inkbird IBT-26S has a few annoyances, but I found they were relatively minor in the grand scheme of things and forgivable, considering the attractive price point.
In particular, I find the Inkbird IBT-26S to be far superior to the Weber Smart Grill I have reviewed, and it is over 60% cheaper.
Overall, I think the Inkbird IBT-26S is superb when you consider how affordable it is and the functionality it provides.
Summary
I think the Inkbird IBT-26S is superb when you consider how affordable it is and the functionality it provides.
Pros
Cons
I am a UK tech blogger and have been in the industry for over 10 years now, running Mighty Gadget and its sister sites and contributing to other sites around the web. I am passionate about all tech, including mobile, wearables, and home automation. I am also a fitness fanatic, so I cover as much fitness tech as possible.
Follow me on Strava
Last update on 2023-08-29 / Affiliate links / Images from Amazon Product Advertising API
Posted on 23rd August 2023
Categories Reviews
Tags
SummaryProsCons